SPECIAL SOUND FEATURES
Dolby Digital
Dolby Digital is available from DVD players, some games console players, etc. These must be connected using
a Scart or phono lead for the picture AND an optical or a coaxial cable for the sound see page 25.
Dolby Digital
Arrange the speakers around your normal viewing positionsDELAY TIME�
(as shown on page 6) and then make sure that the TV If you sit a long way from the TV and close to the rear
is set up as follows:speakers the sound from the rear will reach you before the
The DVD/Games console is connected to the TV usingsound from the front. You can use a higher setting in the
1
phono leads to the COMPONENT VIDEO INPUT or aDelay timeoption to restore the correct balance.
Scart lead to Scart 3, andan optical or coaxial cable to
the optical/coaxial sockets, DA-1 or DA-2.From the Feature menu select Surround set up.
1
The Digital input-1(optical)/ Digital input-2
2
(coaxial) in the AV connection menu (see page 17) isWith Delay time highlighted, press the R button
2
set to EXT 3 if Scart 3 is used or EXT 4 if the equipmentthen use the S or R button to change the setting to a
is connected to COMPONENT VIDEO INPUT.value that suits you.
If external front speakers are connected
3
the external switch (found on the back Press EXIT when you have finished.
3
of the TV) is set to EXT. You will not hear the centre
!
channel without external front speakers connected.If rear speakers are NOT
selected in the
Surround set up
Rear speakers are connected and the Rear speakermenu, you will not hear any sound
4
option in the Surround set upmenu is set to YES.from your rear speakers.
(See next page.)
Adjustments
Set the volumeand balanceof the front speakers to your preference.
1
Play a Dolby Digital source and press the button on the TVOs remote control.
2M
The title, e.g.Dolby Digital 3/2, is an indication of the channels available from
your current sound source, see the table.
To adjust the levels, use the P or Q button to select the centre and two rear
3
speakers in turn. Press either the S or Rbutton to adjust. The number of
adjustable speakers will depend upon the signal received from the DVD player.
To cancel the test press the EXIT button.
4
!Alternatively, use the Test mode in theDolby Digital
SURROUND SET UP menu, see page 19. 1/0=Centre speaker only.
2/0=Front Left and Front Right only.
If the DVD playing is recorded in Dolby Pro Logic,
2/1=Front Left and Front Right +
(front left, front right, centre
i.e. 4 channel stereo
Rear Left and Rear Right combined.
and rear) the TV will detect the 4 channels.
2/2=Front Left and Front Right +
Surround Test Mode
In this instance, when the Independent Rear Left and Independent Rear Right.
is run the TV will cycle through the four channels3/0=Front Left and Front Right and Centre.
in use.No Rear Speakers.
3/1=Front Left and Front Right and Centre +
In order to get full Dolby Digital, the DVDRear Left and Rear Right combined.
player must be connected using the coaxial3/2=Front Left and Front Right and Centre +
or optical links.Independent Rear Left and Independent Rear Right.
18 |
ACEC
