Preparation (Continued)
Step 2: Connecting to audio system
Sound can output from connected audio system.
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.
Via HDMI output
You can enjoy the bene ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your
player to an AV receiver with an HDMI audio input.
This connection requires selection of Digital Out HDMI (Step 16, page 22).
Caution
HDMI cable HDMI cable When you are connecting (via the HDMI
(supplied)(not supplied)OUTPUT jack) an AV decoder that does not
have Dolby Digital or DTS decoding capability,
be sure to set Digital Out HDMI ( page 22)
to PCM or Downmixed PCM. Otherwise,
HDMI INPUTHDMI OUTPUTHDMI INPUT
To HDMI OUTPUThigh volume sound may damage your hearing
as well as the speakers.
Note
AV amplifier You may need to adjust the HDMI audio output
to match the capabilities of your AV ampli er.
HDMI compatible
In this case, set Digital Out HDMI ( page
device
22) to PCM.
Via optical digital audio output
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a
receiver with Dolby Digital and DTS decoding capabilities and an optical digital input.
This connection requires selection of Digital Out SPDIF (Step 16, page 22).
Optical digital cable (not supplied)
To DIGITAL AUDIO OUTPUT *To use the optical digital output, use an
BITSTREAM/PCM OPTICALoptical cable to connect this jack to an
optical audio input on a device capable of
processing Dolby Digital, DTS bitstream, or
PCM audio.
DIGITAL INPUT
OPTICAL
AV amplifier
Via 5.1ch analog audio output
This connection requires selection of Speaker Setting (Step 16, page 23).
Audio cable
(not supplied)
CENTER
LRSURROUNDAV amplifier
LRFRONT
SUBWOOFER
To ANALOG AUDIO
OUTPUT 5.1CH
SURROUND
16
))%&1,&@&OHJOEE%&1,&@&OHJOEE1.1. |
ACEC
