The cutlery basketThe upper basket
Long bladed knives stored in an upright position are aThe upper basket is designed for plates (dessert plates,
potential hazard.saucers, dinner plates of up to 24 cm in diameter), salad bowls,
Long and/or sharp items of cutlery such as carving knivescups and glasses.
must be positioned horizontally in the upper basket.Arrange items on and
Take care when loading or unloading sharp items such asunderneath the cup racks so
knives.that water can reach all
Cutlery should be placed in the removable cutlery basket withsurfaces.
the handles facing downwards. If the handles protrude from theGlasses with long stems can
bottom of the basket, obstructing the lower spray arm, load thebe placed upside down in the
cutlery with the handles facing upwards.cup racks.
Mix spoons with other cutlery to prevent them from stickingFor taller items, the cup racks
together.can be folded upwards.
Light items (plastic bowls etc.)
must be loaded in the upperUS47
basket and arranged so they
do not move.
US73
UI04
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the basket;
tilting them slightly forwards
and avoiding the front
positions near the door.
US71
Before closing the door, ensure that the spray arms can
rotate freely.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
Maximum height of the dishes in
upper basketlower basket
With upper basket raised20 cm31 cm
With upper basket lowered24 cm27 cm
To move to the higher position proceed as
follows:
1.Move the front runner stops
(A) of the upper basket
outwards and slide the
basket out.
2.Refit the basket in the higher
position and replace the
stops (A) in their original
position. RC01
After loading your machine always close the door, as an
open door can be a hazard.
10 |
ACEC
