1. Once a year, remove chassis from outer case and
thoroughly clean air conditioner.
General Information
2. Wash air conditioner with warm, soapy water as needed.
Changing Air Flow DirectionRinse and dry thoroughly.
?Adjust horizontal baffles for directing air up or down3. If using concentrated liquid detergent, dilute in warm
?Adjust vertical baffles with handle to direct air left orwater first.
right4. Do not use abrasive cleaners such as Comet?, Ajax?,
etc. These items can scratch, crack, and discolor sur-
faces.
QUIET ZONEOceanside or Corrosive Environment
EXHAUST CLOSED
Salt air or a corrosive environment may greatly reduce the
VERTICAL BAFFLE
CONTROLlife of the unit. After cleaning, sand and repaint any
scratches or blisters on painted surfaces. In humid areas
Air Flow Around Unitwhere algae formation is common, place an algaecide
tablet in outdoor side of unit base pan.
Check indoor grille and outdoor louvers for air flow obstruc-
tions. Do not block air flow to and from unit. The outdoor coil
should be checked and periodically cleaned for debris thatAir Filter
The front contains a removable grille that provides easy
access to the air filter. The filter can be removed two ways:
METHOD ONE:
Grasp the filter handle and slide the filter to the left until
it clears the unit.
BAFFLES
OUTDOOR
LOUVERS
INDOOR
GRILLE
FILTER
may collect and block unit air flow. If air flow is obstructed
or deflected back into unit, the compressor may cycle on
and off rapidly, causing early compressor failure.
Care and Maintenance
WARNING
To avoid death or personal injury due to
electrical shock, turn fan control off and
unplug power cord before cleaning or
performing maintenance. After cleaning
or performing maintenance, reconnect
power.
Note: The unit should be inspected by an authorized servicer
once a year to ensure proper function of the unit.
6 |
ACEC
