501931502018_GB 18-06-2007 14:56 Pagina 11
USING THE APPLIANCE
GUIDE TO SELECTING FUNCTIONS
Stand-by
This function turns off the refrigerator and freezer compartments. To activate the standby function, press
the button for 3 seconds: both displays will go off and a dash will appear on the left display. To reset the
function, carry out the same procedure until the previously set temperatures are displayed.
Note: Remember that this operation does not disconnect the appliance from the power supply.
Freezer temperature
The factory-set ideal temperature is -18!C. As soon as the freezer compartment reaches the required
temperature, it is automatically displayed.
To change the temperature, press thebuttons until the display shows the required value.
Refrigerator temperature
The factory-set ideal temperature is +5!C.
To change the temperature, press thebuttons until reaching the required value that it will be
displayed.
Ice On/Off
To switch the ice maker on press the on-off button until one of the two icons comes on .
To deactivate the function, repeat the procedure until both icons go off.
Ice mode
This function enables to select the type of ice desired: crushed ice or ice cubes . For further
information refer to the section OUsing the ice and water dispenser� section.
Ice and water dispenser light
The light can be switched on and off by pressing the button on the control panel or pressing one of
the two dispenser levers; the light will switch off automatically once the water or ice has been dispensed.
11 |
ACEC
