Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen ROLL the lint off the screen
straight out. with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place.
Lint removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
GAS DRYERS
Cleaning should be done only by a qualified person.
1. Remove lower access panel,
WARNING:
2. Avoid damaging wires,
l Avoid electrical shock thermostats, funnel or igniter.
hazard - unplug power 3. Remove lint from shaded area -
supply cord or turn off see art-with a soft brush or
electrical power. vacuum cleaner.
l Avoid injury or damage-do not 4. Replace panel; reconnect and
put hands inside cabinet. re-level dryer.
l Make sure dryer is cool. |
ACEC
