Starting Your Washer
2. (OPTIONAL) Pour measured liquid chlorine bleach into the
liquid chlorine bleach dispenser (on some models). Bleach will
WARNING
be diluted automatically during the wash part of the cycle.
Fire Hazard
Never place items in the washer that are dampened
with petrol or other flammable fluids. Do not use more than 250 ml (1 cup) for a full load. Use
less with a smaller load size.
No washer can completely remove oil.
 Follow the manufacturer?s directions for proper use.
Do not dry anything that has ever had any type of oil on
 To avoid spilling, use a cup with a pouring spout. Do not
it (including cooking oils).let bleach splash, drip, or run down into the washer
basket.
Doing so can result in death, explosion, or fire.
 Use only liquid chlorine bleach in this dispenser.
NOTE: On models without a bleach dispenser, see ?Adding
Liquid Chlorine Bleach.?
WARNING
3. (OPTIONAL) Pour measured liquid fabric softener into the
liquid fabric softener dispenser (on some models). Softener is
added automatically during the rinse portion of the cycle.
Electric Shock Hazard
Electrically earth this appliance.
Do not use an extension cord or an electrical portable
Dilute liquid fabric softener by filling the dispenser with warm
outlet device.
water until liquid reaches the crossbar in the opening.
Failure to follow these instructions can result in death,
 Do not spill or drip any fabric softener on the clothes.
fire or electric shock.
 Use only liquid fabric softener in this dispenser.
NOTE: On models without a fabric softener dispenser, see
1. Measure detergent and pour it into the washer. If desired, add ?Adding Liquid Fabric Softener.?
powdered or liquid color safe bleach. Add extra detergent for
4. Close the washer lid. Washer will not agitate or spin with the
the Super Wash cycle.
lid open.
5. Turn the LOAD SIZE selector to the correct setting for your
wash load and the type of fabric being washed.
Drop a sorted load of clothes loosely into your washer.
 Load evenly to maintain washer balance. Mix large and small
items.
 Choose a load size that allows the load to move freely for
best fabric care. See ?Loading.?
 Items should move easily through the wash water.
Overloading can cause poor cleaning. You may change the load size selection after the washer
has started filling by turning the selector to a different
 To reduce wrinkling of permanent press clothes and some
setting.
synthetic knits, select a ?large? water level to provide more
space (see Step 5).
7 |
ACEC
