Load is wrinkled
ASSISTANCE OR SERVICE
nDid you unload the washer promptly?
Unload the washer as soon as it stops.
Before calling for assistance or service, please check
nDid you use the right cycle for the load being washed?
?Troubleshooting.? It may save you the cost of a service call. If
Use the Synthetics/Permanent Press cycle or another cycle
you still need help, contact the dealer from whom you purchased
with low spin speeds (if available) to reduce wrinkling.the washer, or a Whirlpool designated service company.
nDid you overload the washer?When calling, please know the purchase date and the complete
The wash load must be balanced and not overloaded. Loads model and serial number of your appliance. This information will
should move freely during washing.help us to better respond to your request.
nWas the wash water warm enough to relax wrinkles, or
If you need replacement parts
are you using warm rinses?
If safe for the load, use warm or hot wash water. Use cold If you need to order replacement parts, we recommend that you
?
rinse water.only use FSP factory specified parts. These parts will fit right
and work right because they are made with the same precision
nAre the hot and cold water hoses reversed? ?
used to build every new WHIRLPOOL appliance.
Check to be sure the hot and cold water hoses are connected
To locate FSP replacement parts in your area:
to the right faucets. See the Installation Instructions.
Contact the dealer from whom you purchased the washer, or a
Whirlpool designated service company.
Load is tangled or twisted
nDid you overload the washer?
The wash load must be balanced and not overloaded. Loads
should move freely during washing.
nDid you wrap items around the agitator?
Drop items loosely into the washer. Do not wrap items around
the agitator.
Gray whites, dingy colors
nDid you properly sort the load?
Dye transfer can occur when mixing whites and colors in a
load. Sort dark clothes from whites and lights.
nWas the wash temperature too low?
Use hot or warm washes if safe for the load. Hot water should
be at least 111°F (44°C) to clean heavy or greasy soils.
nDid you use enough detergent, or do you have hard
water?
Use more detergent for washing heavy soils in cold or hard
water.
nAre the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are connected
to the right faucets. See the Installation Instructions.
Garment damage
nCheck the following:
Were sharp items removed from pockets before washing?
Empty pockets, zip zippers, snap or hook fasteners before
washing.
Were strings and sashes tied to prevent tangling?
Were items damaged before washing? Mend rips and broken
threads in seams before washing.
nDid you overload the washer?
The wash load must be balanced and not overloaded. Loads
should move freely during washing.
nDid you properly add chlorine bleach?
Do not pour chlorine bleach directly on load. Wipe up bleach
spills. Undiluted bleach will damage fabrics.
nnnnDid you follow the manufacturer?s care label instructions?
12 |
ACEC
