Care and Maintenance
Replacing the Cutting Burrs
If the cutting burrs are damaged, or
have reached the end of their life
(usually after grinding 600-800 lbs. of
coffee), they can be easily replaced.
Contact KitchenAid at
1-800-807-6777 to order a set of
replacement burrs.
To replace the burrs:5. Attach the replacement burrs to
the burr-shaft assembly and the
grind-adjustment ring with the1. Unplug Coffee Mill.
burr-mounting screws. Make2. Remove the grind-adjustment ring
certain the cutting surfaces of theand burr-shaft assembly. For
burrs face outward (see theinstructions, see OCleaning the
Cutting Burrs�, pages 8-9
illustration above), and the burr-steps 1-6.
mounting screws are tight.3. With a Phillips-head screwdriver,
6. Insert the burr-shaft assembly intoremove the burr from the burr-
the motor housing and attach theshaft assembly by turning the two
grind-adjustment ring. Forburr-mounting screws counter-
instructions, see OTo reassemble�,clockwise until free.
page 9, steps 1-3.4. Remove the burr from the grind-
adjustment ring by turning the
two burr mounting screws counter-
clockwise until free.
10 |
ACEC
