REMEMBER:
The Dispenser Light Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.
Style 1: The dispenser light can be turned on by pressing the ON
button. The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the
Style 2: When you use the dispenser, the lever will automatically ice maker to a softened water supply. Water softener
turn the light on. If you want the light to be on continuously, you
chemicals (such as salt) can damage parts of the ice maker
may choose either ON or NIGHT LIGHT. and lead to poor quality ice. If a softened water supply cannot
ON: Press the LIGHT button to turn on the dispenser light. be avoided, make sure the water softener is operating
NIGHT LIGHT: Press the LIGHT button a second time to select properly and is well maintained.
the Night Light. The dispenser light will automatically adjust to  Do not use anything sharp to break up the ice in the storage
become brighter as the room brightens, dimmer as the room bin. This can cause damage to the ice container and the
darkens.
dispenser mechanism.
OFF: Press the LIGHT button a third time to turn off the dispenser
 Do not store anything on top of or in the ice maker or storage
light.bin.
The dispenser lights are LEDs which should not need to be
changed. If it appears that your dispenser lights are not working,
be sure that the light sensor is not blocked (in Night Light mode). Removing and Replacing Ice Storage Bin
See Troubleshooting for more information.
Style 1
1. Pull the covering panel up from the bottom and then slide it
back toward the rear.
2. Lift the wire shutoff arm so it clicks into the OFF (up) position.
Ice can still be dispensed, but no more can be made.
The Dispenser Lock (on some models)
3. Lift up the front of the storage bin and pull it out.
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the product,
to the ice maker, or to the dispenser light. It simply deactivates
the dispenser levers. The ice and water dispensers will not work.
Style 1: Press the LOCK button to lock the dispenser. Press the
UNLOCK button to unlock the dispenser.
Style 2: Press and hold the LOCK OUT button to lock the
4. Replace the bin by pushing it in all the way or the dispenser
dispenser. Press and hold the LOCK OUT button a second time
to unlock the dispenser. will not work. Push the wire shutoff arm down to the ON
position to restart ice production. Make sure the door is
closed tightly.
Ice Maker and Storage BinStyle 2
1. Hold the base of the storage bin with both hands and press
Turning the Ice Maker On/Offthe release button to lift the storage bin up and out.
NOTE: It is not necessary to turn the ice maker control to the
Style 1OFF (right) position when removing the storage bin. The
To turn ON the ice maker, simply lower the wire shutoff arm.sensor cover (flipper door) on the left wall of the freezer
To manually turn off the ice maker, lift the wire shutoff arm to the stops the ice maker from producing ice if the door is open or
OFF (arm up) position and listen for the click.the storage bin is removed.
NOTE: Your ice maker has an automatic shutoff. As ice is made, 2. Replace the storage bin on the door and push down to make
the ice cubes will fill the ice storage bin, and the ice cubes will sure it is securely in place.
raise the wire shutoff arm to the OFF (arm up) position. Do not
force the wire shutoff arm up or down.
Style 2
The On/Off switch is located on the top right-hand side of the
freezer compartment.
To turn on the ice maker, slide the control to the ON (left) position.
To manually turn off the ice maker, slide the control to the OFF
(right) position.
NOTE: Your ice maker has an automatic shutoff. The ice maker
sensors will automatically stop ice production, but the control will
remain in the ON (left) position.
11 |
ACEC
