Complete Installation
NOTE: Handle air conditioner gently. Position ground wire pointing straight up. Put excess ground
wire between coil and air conditioner cabinet.
1. Make sure the free end of the ground wire is outside of the
cabinet.
WARNINGA
Excessive Weight Hazard
++
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.+B
A.Green ground wire
B.Ground screw
2. Insert air conditioner into cabinet.
REMEMBER: Make sure the free end of the ground wire is 4. Remove the 2 front panel screws from air conditioner base.
outside of the cabinet.
5. Insert front tabs of front panel into top of cabinet and swing
front into place.
6. Attach bottom front of panel with front panel screws. Replace
control knobs (on some models).
NOTE: For through-the-wall installations, if needed, install
Amolding around room side of cabinet.
WARNING
A.Make sure the free end of the ground wire
is outside of the cabinet.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Electrical Shock HazardDo not use an adapter.
Connect green ground wire to ground screw.Do not use an extension cord.
Failure to do so can result in death or electrical shock.Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect green ground wire to cabinet base with ground
screw. 7. Plug into a grounded 3 prong outlet.
8. Press RESET on the power supply cord plug.
10 |
ACEC
