Press the minus button to lower the temperature. Room 8. Press TIMER again or wait 10 seconds. Timer indicator light
indicator light will turn off, and Set indicator light will turn on. will remain on. Hour indicator light will turn off, and Room
Display shows the Temperature control setting. Each time you indicator light will turn on. Display will show current room
press or hold the minus button, the temperature will decrease temperature.
1o until it reaches 64°F (18°C).
To clear Timer delay program:
NOTE: After 3 seconds, Set indicator light will turn off, and
Room indicator light will turn on. Display will show the current NOTE: Air conditioner can be either on or off.
room temperature.Press and hold TIMER for 3 seconds. Timer indicator light will
shut off.
To change the temperature display from °F to °C:
1. Turn off the air conditioner. To see or change the remaining time (in hours):
2. While the air conditioner is off, press and hold down the 1. Press TIMER once after it has been programmed. Hour
MODE and FAN SPEED buttons while pressing POWER to indicator light will turn on, and display will show remaining
time.
turn on the air conditioner.
2. While the display is showing the remaining time, you can
NOTE: Follow these same steps to change the temperature
display from °C to °F.press the plus or minus button to increase or decrease the
time.
Timer Delay3. After 10 seconds, Hour indicator light will turn off, and Room
indicator light will turn on. Display will show the current room
To set the Timer for a 1- to 24-hour delay until the air temperature.
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Timer indicator light will flash. Hour indicator To Operate Air Conditioner with Remote Control
light will turn on, and display will show remaining hours
before air conditioner will turn off.NOTE: Remote control may vary in appearance.
2. Press the plus or minus button to adjust the delay time (1 to
24 hours).
3. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Hour indicator light will turn off, and Room
indicator light will turn on. Display will show the current room
temperature.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off air conditioner.
2. Press TIMER. Timer indicator light will flash. Hour indicator
light will turn on, and display will show remaining hours
before air conditioner will turn on.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Hour indicator light will turn off, and Room
indicator light will turn on. Display will show current room
temperature.
To set the Timer to turn on the air conditioner, changing
the previous settings:
1. Turn on air conditioner.NOTE: Two AA batteries (not included) power the remote control.
Replace batteries after 6 months of use, or when the remote
2. Adjust Mode to Auto, Cool, Fan Only, or Power Saver.control starts to lose power.
NOTE: For Auto mode, go to Step 4.
To turn the air conditioner on or off:
3. For Cool, Fan Only or Power Saver mode, adjust FAN SPEED
to Turbo, High or Low.Press POWER.
4. Adjust temperature between 64°F (18oC) and 86°F (30oC).
5. Wait 3 seconds before turning off air conditioner.
6. Press TIMER. Timer indicator light will flash. Hour indicator
light will turn on, and display will show remaining hours
before air conditioner will turn on.
7. Press the plus or minus button to change delay time (1 to
24 hours).
16 |