Complete Installation
AIR CONDITIONER USE
1. Place window-lock bracket on top of lower window and
against upper window sash.
Operating your air conditioner properly helps you to obtain the
2. Use a 3D?? in. drill bit to drill a starter hole through the hole in best possible results.
the bracket into the window sash.
3. Attach window-lock bracket to window sash with #8 x 3D? in. This section explains proper air conditioner operation.
IMPORTANT:
round-head screw to secure window in place.
If you turn off the air conditioner, wait at least 3 minutes
before turning it back on. This prevents the air conditioner
1from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode
when outside temperature is below 65°F (18°C). The inside 2
evaporator coil will freeze up, and the air conditioner will not
operate properly.
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
1. Upper window sash
2. Window-lock bracket
Starting Your Air Conditioner -
4. Insert foam seal behind the top of the lower window sash and
Digital Control
against the glass of the upper window.
1
2
1. Lower window sash
2. Foam seal
1. Remove clear protective film from control panel and front
WARNINGpanel badge.
2. Press POWER to turn on air conditioner.
NOTE: When air conditioner is turned on for the first time
after it is plugged in, it will display the default settings: Cool
mode, Turbo fan speed, 72°F (22°C). When it is turned on at
Electrical Shock Hazardall other times, it will display the previous settings.
Plug into a grounded 3 prong outlet.3. Select mode. See ?Mode.?
Do not remove ground prong.4. Select fan speed. See ?Fan Speed.?
Do not use an adapter.5. Set temperature. See ?Temperature.?
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
5. Plug into a grounded 3 prong outlet.
10 |
ACEC
