Oven Cooking
To cancel the Clock display:
Locking the Control
If you do not want the time of day to display:
The touchpad controls can be locked for safety, cleaning, or
Press and hold the Cancel and Clock pads for threeto prevent unwanted use. They will not function when locked.
seconds. The time of day will disappear from the display.
If the oven is currently in use, the controls cannot be locked.
When the clock display is canceled, press the Clock pad to
The current time of day will remain in the display when the
briefly display the time of day.
controls are locked.
To restore the Clock display:
To lock:
Press and hold the Cancel and Clock
Press and hold the Cancel and Cook &
pads for three seconds. The time of day
Hold pads for three seconds. (Press
will reappear in the display.
Cancel pad first.)
To unlock:
Press and hold the Cancel and Cook & Hold pads for three
Timer
seconds. (Press Cancel pad first.)
The timer can be set from one minute (0:01) up to 99 hours
and 59 minutes (99:59).
The timer can be used independently of any other oven
Fault Codes
activity. It can also be set while another oven function is
BAKE or LOCK may flash rapidly in the display to alert you if
operating.
there is an error or a problem. If BAKE or LOCK flash in the
The timer does not control the oven. It only controls a beeper.display, press Cancel pad. If BAKE or LOCK continue to
flash, disconnect power to the appliance. Wait a few minutes,
To set the Timer:
and then reconnect power. If the flashing still continues,
1. Press the Timer pad.
disconnect power to the appliance and call an authorized
Y 0:00 lights in the display.servicer.
Y The colon will flash.
2. Press the 2 or 1 pad until the
correct time appears in the display.
Y The colon will continue to flash.
3. Press Timer pad again or wait four seconds.
Y The colon continues flashing and the time begins
counting down.
Y The last minute of the timer countdown will be displayed
as seconds.
4. At the end of the set time, one long beep will sound.
To cancel the Timer:
1. Press and hold the Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 0:00.
8 |
ACEC
