NC
TROUBLEîSHOOTING GUIDE
1. The burner fails to ignite:2. The burner fails to remain lit:
yIsthemaingasdeliveryvalveopenayRepeattheignitionoperation,turningthe
yHasthedeliveryofthetowngas�methaneOknob to the position with the small flame
symbol.
been suspendeda
yIsthegascylinder�liquidgasOemptya3. The electric ignition device does not
yAretheopeningsoftheburnercloggedawork:
yIsthereapowerfailurea
yHavethecapandburnerbeenpositioned
correctly after cleaninga �See paragraph
oCare and maintenanceó.O
AFTERîSALES SERVICE
Before you call the AfterîSales Service:
1. Check the oTroubleshooting guideó above to
see if you can eliminate the trouble yourself.
2. Reîstart the cooking hob, to check whether
correct operation has been restored.
3. If the malfunction persists, call the Afterîsales
Service.
Give the following information:
xtypeofmalfunction;
xmodelofcookinghob;
xservicenumber�i.e.,thenumberthatl
follows the word SERVICE on the rating
plate under the cooking hob and on the
guarantee paperO;
xyourcompleteaddress;
xyourtelephonenumberandareacode.
If any repairs are required, please contact an
authorised AfterîSales Service, as indicated
in the warranty.
In the unlikely event that an operation or repair
is carried out by an unauthorised technician,
always request a certification of the job carried
out and insist on the use of original spare
parts.
Failure to comply with these instructions
may compromise the safety and quality of
the product.
If any repairs are required, please contact
an authorised customer service centre, as
indicated in the warranty.
In the unlikely event that an operation or
repair is carried out by an unauthorised
technician, always request a certification
of the job carried out and insist on the use
of original spare parts.
Failure to comply with these instructions
may compromise the safety and quality of
the product.
14
MY
14 GB 67873 |
ACEC
