Complete the InstallationReverse Doors (optional)
IMPORTANT: If you want to reverse your doors so that they open
in the opposite direction, follow these steps. If you are not WARNING
reversing the doors, see ?Replace Doors and Hinges.?
Round-HeadDoor Handle
Handle ScrewScrew Hole Plug
Cabinet
Electrical Shock Hazard
1. Remove u??" hex-head hinge screws from handle side and
Plug into a grounded 3 prong outlet.move them to opposite side. See Graphic 1.
2. Remove cabinet hinge hole plugs from the cabinet top and
move them to opposite side hinge holes as shown in Do not remove ground prong.
Do not use an adapter.Graphic 2.
Do not use an extension cord.Doors
1. Remove door stop from both the freezer and refrigerator
Failure to follow these instructions can result in death,
doors and move to the other side. See Graphics 3 and 4.
fire, or electrical shock.
Replace Doors and Hinges
1. Plug into a grounded 3 prong outlet.
NOTE: Allow 24 hours to produce the first batch of ice. Discard NOTE: Graphic may be reversed if door swing is reversed.
the first three batches of ice produced. Allow 3 days to 1. Replace the parts for the bottom hinge as shown. Tighten
completely fill ice container.
screws. See Bottom Hinge graphic. Replace the refrigerator
door.
Refrigerator DoorsNOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
TOOLS NEEDED: u??" hex-head socket wrench, #2 Phillips
screwdriver, flat-blade screwdriver, u??" open-end wrench, flat 2" to hold the doors in place while you are working.
putty knife.2. Assemble the parts for the center hinge as shown and tighten
IMPORTANT: all screws. See Center Hinge graphic. Replace the freezer
 Unplug refrigerator or disconnect power.door.
3. Assemble the parts for the top hinge as shown in Top Hinge
 Remove food and any adjustable door or utility bins from
graphic. Do not tighten screws completely.
doors.
4. Line up the doors so that the bottom of the freezer door
 If you only want to remove and replace the doors, see aligns evenly with the top of the refrigerator door. Tighten all
?Remove Doors and Hinges? and ?Replace Doors and screws.
Hinges.?
 Depending on your model, you have either standard doors or Final Steps
contour doors. If you are going to reverse the door swing,
follow the instructions for the appropriate door style. 1. Check all holes to make sure that hole plugs and screws are
 All graphics referenced in the following instructions are in place. Reinstall top hinge cover. See Top Hinge graphic.
included later in this section after ?Final Steps.?2. Replace the base grille. See Base Grille graphic.
Remove Doors and Hinges WARNING
u??" Hex-head hinge screw
1. Unplug refrigerator or disconnect power.
2. Open refrigerator door and remove base grille from the
Electrical Shock Hazard
bottom front of the refrigerator. See Base Grille graphic.
Plug into a grounded 3 prong outlet.
3. Close the refrigerator door and keep both doors closed until
you are ready to lift them free from the cabinet.
Do not remove ground prong.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets Do not use an adapter.
to hold the doors in place while you are working.Do not use an extension cord.
4. Remove the parts for the top hinge as shown in Top Hinge Failure to follow these instructions can result in death,
graphic. Lift the freezer door free from the cabinet.
fire, or electrical shock.
5. Remove the parts for the center hinge as shown in the Center
Hinge graphic. Lift the refrigerator door free from the cabinet.
3. Plug into a grounded 3 prong outlet.
6. Remove the parts for the bottom hinge as shown in the
4. Return all removable door parts to doors and food to
Bottom Hinge graphic.refrigerator.
5 |
ACEC
