TROUBLE-SHOOTING GUIDE
Machine vibrates during spin cycle:Detergent and additive product residues in
Check the following:detergent drawer at end of wash:
- Is the machine perfectly horizontaCheck the following:l with all
four feet on ground? (see ?Installation - Is the siphon installed correctly and not
Instructions?).clogged (s?ee Care and
- Have the transit bolts been removed?Maintenance?,?Detergent Drawer?)?
The transit bolts must be removed before Also check:
the machine is used (see ?Installation - Is not enough water delivered? The mesh
Instructions?).filter in the water hose could be clogged (see
?Care and Maintenanc?,?Wateer Hose Mesh
The machine does not spin at the end of the
programme:Filter?).
- The machine is fitted with an imbalance
detection and correction system. If the wash
consists of a single heavy/large size article
(bathrobe, bath mats, etc.) the system can
automatically reduce the spin speed to
protect the machine or even stop the spin
cycle altogether, if the imbalance is too great
even after several restarts.
- If the load is too wet at the end of the
programme, add further garments and run a
new spin cycle.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1. Try to remedy the problem (see ?Trouble-
Shooting Guid?).e
2. Restart the programme to see if the fault is
repeated.The After-Sales Service sticker is on the
3. If the malfunction persists, call Afteinside r-Salesof the door .
Service.
Specify:
The nature of the problem.
The exact model of the appliance.
The service code (number after the word
SERVICE). Your full address.
Your telephone number and area code.
The After-Sales Service telephone
number and address can be found in the
warranty or on application to the retailer.
34 |
ACEC
