SELECTING THE PROGRAMME
AND SPECIAL OPTIONS / PROGRAMME START
SELECTING THE PROGRAMME
(See also the separate programme chart and A
consumption data)
A For appliances WITH temperature
selector knob
1. Turn the programme selector knob
clockwise to the desired programme.
2. Set the temperature knob to the desired
temperature.
B For appliances WITHOUT temperature
selector knob
Turn the programme selector knob clockwise to B
the programme with the desired temperature.
PRESS THE DESIRED SPECIAL OPTION
BUTTON
(Depending on model, see also the separate
programme chart).
Spin speed reduction button
Press this button to reduce the spin speed.
No spin button
Press this button to exclude the spin function Intensive rinse button
from the programme. This function is especially suitable in areas
Rinse hold/Spin delay button with extremely soft water, for baby clothes
and to help people with allergies.
The laundry remains in the last rinse water In the rinsing cycle approx. 10 l more water
without being spun, to avoid heavy creasing.
are used.
Especially suitable fo?Syntr thehet?i or c This special function is recommended for the
?Delicate? programmes, if the laundry is not 95°C ?Cotton? and 6°0C ?Synthetic?
to be unloaded immediately after the end of
programmes, since in this way the wash
the programme.water is cooled before drainage.
Stopping Rinse hold
Press the Rinse hold button again; th95e lo°C Cotadt on
will be spun according to the selected This function can be select?Cottoned in? t he
programme.programme.
Lightly soiled/Half load button Suitable for fabrics with this symbol on the
Reduces water consumption, above all label.
during the rinse. Recommended only for heavily soiled
Especially suitable for lightly soiled or small laundry.
loads (reduce the detergent quantity).
PROGRAMME START
Cold wash button 1. Plug in the appliance.
The water is used at the water supply 2. Turn on the water supply tap.
temperature.3. Press the ?ON/OFF? button.
DOOR LOCK / PROGRAMME END / PROGRAMME RESELECTION
DOOR LOCK4. Wait for the door to unlock (about 2 minutes).
The door locks automatically after the 5. Open the door and unload the machine.
programme start until the end of the proNogte:ramme Do not .fully close the door but leave it ajar
to allow the drum to dry out.
PROGRAMME END
The programme sequence indicator is at ?Stop?.PROGRAMME RESELECTION
1. Press the ?ON/OFF? button.1. Press the ?ON/OFF? button.
2. Cancel the special options by pressi2.ngS theelect the new programme, temperature and
appropriate buttons.relative options.
3. Turn the water supply tap(s) off.3. Press the ?ON/OFF? button.
25 |
ACEC
