10.Rehang doors by replacing bottom, center, and top
hinges, along with freezer and refrigerator doors on
opposite side of refrigerator performing steps 2-8 in
5/16" screws
reverse order.
3
? Use a penny at top to space door /4" (18 mm)
Top hinge
from cabinet.
? Handle side of door should be approximately
Door closure1
/8" (3 mm) higher than hinge side.
(some models)
Center hinge
5/16" pin1
/8"
hex nut
(3 mm)
Center hinge
bracket
Center hinge
Phillips screws
3
/4"
(18 mm)
Door closure
Plug
(some models)
(some models)
Bottom hinge
11. Replace freezer door handles.
3/8" Models with freezer handle cap.
screws
? Mount handle to opposite side of door using
mounting screws removed in previous step.
? Angle front edge of handle cap downward toward
back lip of freezer handle. Verify bottom tab on
! CAUTIONfreezer cap slides under rear lip of freezer handle.
Snap rear edge of handle cap in place. Place 2
Protect soft vinyl or other flooring with cardboard, rugs
or other protective material to avoid property damage.button plugs in empty mounting holes.
9. Reverse doors as necessary by performing the
following steps:
? Remove button plugs from opposite side of
refrigerator cabinet using putty knife covered withHandle
masking tape. Insert button plugs in holes left fromcap
hinge removal.
Screws
? Remove freezer door internal support rod located
underneath freezer handle. Reinstall internal
support rod in hinge hole on opposite side of door.
Freezer
Supporthandle
rod
Models without freezer handle cap.
? Place hinge shim on non-hinge side of door. Large
hole in hinge shim must line up with hole created
from hinge reversal.
Freezer handle
shim
Hinge hole
6 |
ACEC
