To remove and replace ice bucket:
1. Place four fingers in bucket base opening and rest thumb on
Refrigerator Shelves
the release button.
2. Holding the base of the bucket with both hands, depress the The shelves in your refrigerator are adjustable to meet your
individual storage needs. Your model may have glass or wire
release button and lift the bucket up and out. It is not shelves.
necessary to turn the ice maker control to the OFF (right)
Storing similar food items together in your refrigerator and
position. The ice maker will not produce ice without the adjusting the shelves to fit different heights of items will make
bucket installed in the door.
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open, and save energy.
Slide-out Shelves (on some models)
To slide out shelf, carefully pull front of shelf toward you.
To slide in shelf, push shelf in until it stops.
Normal Ice Production should produce approximately 7 to 9
batches of ice in a 24-hour period.
To care for ice storage bin or bucket:
1. Empty the ice container. Use warm water to melt the ice if
necessary. Never use anything sharp to break up the ice in To remove and replace a shelf in a metal frame:
the bin or bucket. This can cause damage to the ice container 1. Pull the shelf forward to the stop.
and the dispenser mechanism.
2. Tilt the front of the shelf up and lift it slightly as you pull the
2. Wash ice bin or bucket with a mild detergent, rinse well and shelf from the frame.
dry thoroughly. Do not use harsh or abrasive cleaners or
3. Replace the shelf by guiding it back into the slots on the
solvents.frame and pushing the shelf in past the stop.
REMEMBER:Shelves and Shelf Frames
Allow 24 hours to produce the first batch of ice.
To remove and replace a shelf/frame:
Discard the first three batches of ice produced to avoid
1. Remove the shelf/frame by tilting it up at the front and lifting it
impurities that may be flushed out of the system.out of the shelf supports.
The quality of your ice will be only as good as the quality of 2. Replace the shelf/frame by guiding the rear shelf hooks into
the water supplied to your ice maker.the shelf supports. Tilt the front of the shelf up until rear shelf
Avoid connecting the ice maker to a softened water supply. hooks drop into the shelf supports.
Water softener chemicals (such as salt) can damage parts of 3. Lower the front of the shelf and check to make sure that the
the ice maker and lead to poor quality ice. If a softened water shelf is securely in position.
supply cannot be avoided, make sure the water softener is
operating properly and is well maintained.
It is normal for the ice cubes to be attached at the corners.
They will break apart easily.
For Style 1, do not force the wire shut-off arm up or down.
Do not store anything on top or in the ice maker or ice bin or
bucket.
Lateral Adjustable Shelf
(on some models)
REFRIGERATOR FEATURESTo slide the shelf from side to side:
1. Lift up on the front of shelf and slide to the desired location.
Your model may have some or all of these features. Features that 2. Lower shelf to the level position.
can be purchased separately as product accessories are labeled
with the word ?Accessory.? Not all accessories will fit all models. NOTE: You do not have to remove small items from the shelf
before moving it from side to side. You may need to remove
If you are interested in purchasing one of the accessories, please larger items.
call the toll-free number on the cover or in the ?Assistance or
Service? section.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when re-
moving them to avoid impact from dropping.
13 |
ACEC
