4. Remove door handle sealing screws. Move to opposite side
Door Reversal (optional)of refrigerator door as shown (see Graphic 4).
5. Remove door handle seal screw front. Move to opposite side
of refrigerator door as shown (see Graphic 7).
6. Remove door stop. Move to opposite side of refrigerator door
as shown (see Graphic 5).
Door Stop ScrewDoor Hinge Hole Plug
7. Position refrigerator handle on opposite side of the
refrigerator door as shown (see Graphic 6-3). Drive top two
screws in handle first. Align lower portion of handle and drive
bottom screw.Door Handle Sealing Screw Cabinet Hinge Hole Plug
8. Align refrigerator bottom trim. For Style 1, replace the door
handle screw cover (see Graphic 6-1). For Style 2, slide trim
Flat-Head Handle Screw Door Handle Screw Coverinto place (see Graphic 6-2).
9. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on product.
Door Handle Seal Screw Front Round-Head Handle Screw
Door and Hinge Replacement
Cabinet
1. Remove uD?? in. hex-head hinge screws from handle side and NOTE: Graphic may be reversed if door swing is reversed.
move them to opposite side (see Graphic 1-1).1. Replace the parts for the bottom hinge as shown. Tighten
2. Remove cabinet hinge hole plugs from cabinet top and move screws. Replace the refrigerator door.
them to opposite side hinge holes as shown (see Graphic NOTE: Provide additional support for the doors while the
1-2).hinges are being moved. Do not depend on the door magnets
Freezer doorto hold the doors in place while you are working.
1. Remove freezer handle assembly as shown. Keep all parts 2. Assemble the parts for the center hinge as shown and tighten
together (see Graphic 2).all screws (see Center Hinge graphic). Replace the freezer
door.
2. Remove door hinge hole plug. Move to opposite side as
shown (see Graphic 3).3. Assemble the parts of the top hinge as shown (see Top Hinge
graphic). Do not tighten screws completely.
3. Remove door handle sealing screws. Move to opposite side
of freezer door as shown (see Graphic 4).4. Line up the doors so that the bottom of the freezer door
aligns evenly with the top of the refrigerator door. Tighten all
4. Remove door stop. Move to opposite side of freezer door as screws.
shown (see Graphic 5).
5. Position freezer handle on opposite side of freezer door.
Final Steps
Assemble handles on door as shown (see Graphic 2).
6. Tighten all screws. Set aside door until hinges and refrigerator
1. Check all holes to make sure that hole plugs and screws are
compartment door are in place.in place. Reinstall top hinge cover (see Top Hinge graphic).
Refrigerator door
2. Replace the base grille (see Base Grille graphic).
1. Remove refrigerator handle bottom trim. For Style 1, remove 3. Plug in refrigerator or reconnect power.
the handle screw cover (see Graphic 6-1). For Style 2, slide
trim down as shown (see Graphic 6-2).4. Reset the controls (see ?Using the Control(s)? section).
2. Remove refrigerator handle assembly as shown. Keep all 5. Return all removable door parts to doors and food to product.
parts together (see Graphic 6-3).
3. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown (see Graphic 3).
7 |
ACEC
