SEMOVABLE OVEN RACKS TO ADJUST OVEN TEMPERATURE
Be careful not to scratch the oven finish when installing or removing 1 Turn OVEN CONTROL knob to OFF and remove the knob by pulling
the oven rack. strarght otf
To nstall: IMPORTANT Before you replace the OVEN CONTROL knob, turn to page
12 and carelully read the InstructIons for replacIng the knob Do not force
1 Set the raised back edge of the rack on a pair of rack guides
the knob onto the thermostat stem or you may damage it.
2 Push the rack In until you reach the bump In the rack gurde, then lift
the iront of the rack a bit and push the rack all the way In 2 The factory settng for the knob lines the lndlcator mark on the knob
up with the mark In the center of the scale The knob can be adjusted
To Remove: up to 5OFo hotter or 5OFo cooler, in 10FO steps
1 Pull the oven rack out, then up. 3 Use a screwdrlver to loosen the screws about 1 turn each
See the cleanrng rnstruct~ons on page 11 4 Rotate the metal part of the back of the knob In the HOTTER or
COOLER directron Each mark on the scale represents lOOF
5 When you reach the desired adfustment. retlghten both screws
When ustng the oven, after adfustfng the oven control knob, set the oven
control so that the tip of the pointer pornts to the selected temperature
Select only the temperature with the pointer. Use the wihite mark on
the front of the knob to select the OFF and BROIL positions.
POINTER AT
POINTER
ORIGINAL
POINTER ADJUSTED
FACTORY
ADJUSTED TOWARD
yy)w;y, sETi?NG
INDICATOR
SCREW
MARK
ADJUSTING OVEN CONTROL KNOB
The temperature in your new oven has been set correctly at the factory,
so be sure to follow the rectpe temperatures and times the frrst few trmes
you bake in your new oven.
If you thank the oven should be hotter or cooler, you can adjust tt yourself
To dectde how much to change the temperature, set the OVEN CONTROL
knob 25oF hrgher or lower than the temperature in your recipe then bake.
The results of this ?test? should give you an Idea of how much the
terrperature should be changed 14 |
ACEC
