Center will be
On some models:
clear when
The center of the Fill Indicator Cap will be
empty, on
clear when dispenser needs refilling. Mm modets
On soms models:
1. Press the flexible clear top of the Fill
Indicator Cap to draw rinse agent
into cap.
NOTE: You may need to press cap two
or three times to remove all of the air
Prws flexible
bubbles from the cap.
clear top, on
2. When rinse agent does not show in cap, 8omenKKlelr
even after pressing flexible cap several
times, dispenser needs refilling.
To fill dispenser
You do not have to wait until the dispenser
is empty to refill it, but do not overfill it. The
dispenser will hold 6 ounces (175 mL) of
rinse agent. Under normal conditions, this
will last about 3 months.
1. Make sure the dishwasher door is fully
Keep rinse agent
open. dispenser filled for
2. Remove the Fill Indicator Cap. best drying resuits
3. Add rinse agent to the dispenser. Do not
fill past the smallest opening in the lower
part of the dispenser.
If you overfill, excess rinse agent can
come out. This will not harm the dish-
washer, but could cause over-sudsing.
4. Clean up any spilled rinse agent with a
damp cloth.
5. Replace the Fill Indicator Cap and keep it
Do not fill past ?
tightly closed.
smallest opening
NOTE: Your dishwasher is designed to use
a liquid rinse agent. You do not need to use
a solid or bar-type rinse agent.
Quiet operating tips
To avoid thumping and clattering noises
during operation:
l Make sure lightweight load items are l Load dishes so they do not touch one
secured in the racks. another.
l Make sure pot lids and handles, pizza NOTE: Keep sink drain plugs inserted during
pans, cookie sheets, etc. do not touch dishwasher operation to prevent noise
interior walls or interfere with the spray transfer through drains.
arm?s rotation or cover the spray tower.
12 |
ACEC
