SETTING THE CONTROLS
Adding an item during a cycle
You can add an additional item to the
dishwasher anytime before the main wash
portion of a cycle. See the OSelecting a wash
cycle� chart.
1.Lift up the door latch to stop the cycle.
Wait for spraying action to stop before
opening the door.
2.Open the door and add the item.
3.Close the door, but do not latch it. Wait
30 seconds for the air in the dishwasher
to warm up. Doing so reduces the
amount of moisture in the vent when
restarting a cycle.
4.Close the door firmly until it latches. The
dishwasher resumes the cycle.
Using the delay wash cycle
Use 4 Hour Delay Start to run the dish-NOTES:
washer during off-peak hours to reduceY Press 4 Hour Delay Start anytime during
energy usage or to reduce daytime heatthe delay period to start dish-
buildup in your home.washer immediately.
1.Close door firmly until it latches.4 HOUR4 HOUR
DELAY
START
Y Press Cancel/Drain to cancel the delay
cycle. The 4 Hour Delay Start
indicator will turn off. Press new
2.Press 4 Hour Delay Start. The padCANCELCANCELCycle and Option pads.
indicator will glow red.DRAINDRAIN
4 HOUR4 HOUR
DELAYY You can add items to the load anytime
STARTduring the delay countdown. After adding
items, close the door firmly until it latches.
3.Press a Cycle pad. The Delay StartThe delay countdown will not continue if
countdown begins when youthe door is not latched.
press the Cycle pad. If you
donOt press a Cycle pad within
30 seconds, the Delay Start
indicator turns off.
4.If desired, press one or more Option pad(s).
The 4 Hour Delay Start indicator stays on
until the wash cycle begins.
16 |
ACEC
