Freezer door
Reverse Doors-Contour Door (optional)
1. Remove freezer handle assembly as shown. Keep all parts
together. See Graphic 2.
2. Remove the door hinge hole plug. Move it to the opposite side Cabinet
as shown in Graphic 3.1. Remove the uD??" hex-head hinge screws from handle side and
move them to the opposite side. See Graphic 1-1.
3. Remove the door handle sealing screws. Move them to the
opposite side of the freezer door as shown in Graphic 4.2. Remove the cabinet hinge hole plugs from the cabinet top and
4. Remove the door stop. Move it to the opposite side of the move them to the opposite side hinge holes as shown in
freezer door as shown in Graphic 5. Graphic 1-2.
Doors
5. Position the freezer handle on opposite side of freezer door.
Assemble handles on the door as shown in Graphic 2.1. Remove the door hinge hole plugs from the top of the freezer
6. Tighten all screws. Set aside the door until the hinges and and refrigerator doors. Move them to the opposite side as
refrigerator compartment door are in place.shown in Graphic 3.
2. Remove the door stops from both the freezer and the
Refrigerator doorrefrigerator doors and move them to the opposite side. See
1. Remove refrigerator handle bottom trim. For Style 1, remove Graphic 5.
the handle screw cover. See Graphic 6-1. For Style 2, slide
trim down as shown in Graphic 6-2.
Replace Doors and Hinges (all models)
2. Remove the refrigerator handle assembly as shown. Keep all
parts together. See Graphic 6-3.NOTE: Graphic may be reversed if door swing is reversed.
3. Remove the door hinge hole plug from refrigerator door. Move 1. Replace the parts for the bottom hinge as shown and tighten
it to the opposite side hinge hole as shown in Graphic 3.screws. See Bottom Hinge graphic. Replace the refrigerator
4. Remove the door handle sealing screws. Move them to the door.
opposite side of the refrigerator door as shown in Graphic 4.NOTE: Provide additional support for the doors while the
5. Remove the door handle seal screw front. Move it to the hinges are being moved. Do not depend on the door magnets
opposite side of the refrigerator door as shown in Graphic 7.to hold the doors in place while you are working.
6. Remove the door stop. Move it to the opposite side of the 2. Assemble the parts for the center hinge as shown and tighten
refrigerator door as shown in Graphic 5. all screws. See Center Hinge graphic. Replace the freezer
7. Position the refrigerator handle on opposite side of the door.
refrigerator door as shown in Graphic 6-3. Drive the two top 3. Assemble the parts of the top hinge as shown in the Top
screws in the handle first. Align the lower portion of the handle Hinge graphic. Do not tighten the screws completely.
and drive the bottom screw.
4. Line up the doors so that the bottom of the freezer door aligns
8. Align refrigerator bottom trim. For Style 1, replace the door evenly with the top of the refrigerator door. Tighten all screws.
handle screw cover. See Graphic 6-1. For Style 2, slide trim
into place. See Graphic 6-2.Final Steps (all models)
9. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on product.1. Check all the holes to make sure that hole plugs and screws
are in place. Reinstall the top hinge cover as shown in the Top
Hinge graphic.
2. Replace the base grille. See Base Grille graphic.
3. Plug in refrigerator or reconnect power.
4. Reset the controls. See ?Using the Control(s).?
5. Return all removable door parts to doors and food to
refrigerator.
6 |
ACEC
