Refrigerator door
1. Remove refrigerator handle bottom trim. For Style 1, remove Replace Doors and Hinges (all models)
the handle screw cover. See Graphic 6-1. For Style 2, slide
NOTE: Graphic may be reversed if door swing is reversed.
trim down as shown in Graphic 6-2.
2. Remove the refrigerator handle assembly as shown. Keep all 1. Replace the parts for the bottom hinge as shown and tighten
parts together. See Graphic 6-3.screws. See Bottom Hinge graphic. Replace the refrigerator
3. Remove the door hinge hole plug from refrigerator door. door.
Move it to the opposite side hinge hole as shown in NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
Graphic 3.to hold the doors in place while you are working.
4. Remove the door handle sealing screws. Move them to the
opposite side of the refrigerator door as shown in Graphic 4.2. Assemble the parts for the center hinge as shown and tighten
5. Remove the door handle seal screw front. Move it to the all screws. See Center Hinge graphic. Replace the freezer
opposite side of the refrigerator door as shown in Graphic 7.door.
3. Assemble the parts of the top hinge as shown in the Top
6. Remove the door stop. Move it to the opposite side of the Hinge graphic. Do not tighten the screws completely.
refrigerator door as shown in Graphic 5.
7. Position the refrigerator handle on opposite side of the 4. Line up the doors so that the bottom of the freezer door
refrigerator door as shown in Graphic 6-3. Drive the two top aligns evenly with the top of the refrigerator door. Tighten all
screws in the handle first. Align the lower portion of the screws.
handle and drive the bottom screw.Final Steps (all models)
8. Align refrigerator bottom trim. For Style 1, replace the door
handle screw cover. See Graphic 6-1. For Style 2, slide trim
into place. See Graphic 6-2.1. Check all the holes to make sure that hole plugs and screws
9. Tighten all screws. Set aside refrigerator door until bottom are in place. Reinstall the top hinge cover as shown in the Top
hinge is installed on product.Hinge graphic.
2. Replace the base grille. See Base Grille graphic.
Reverse Doors-Contour Door (optional)
IMPORTANT: If you want to reverse your doors so that they open WARNING
in the opposite direction, follow these steps. If you are not
reversing the doors, see ?Replace Doors and Hinges.?
Cabinet
1. Remove the u??" hex-head hinge screws from handle side and
move them to the opposite side. See Graphic 1-1.
2. Remove the cabinet hinge hole plugs from the cabinet top
Electrical Shock Hazard
and move them to the opposite side hinge holes as shown in
Graphic 1-2.Plug into a grounded 3 prong outlet.
DoorsDo not remove ground prong.
1. Remove the door stops from both the freezer and the
refrigerator doors and move them to the opposite side. See Do not use an adapter.
Graphic 5.Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Plug into a grounded 3 prong outlet.
4. Reset the controls. See ?Using the Control(s).?
5. Return all removable door parts to doors and food to
refrigerator.
6 |
ACEC
