Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use To remove shelves:
your refrigerator. 1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace shelves:
I. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing and adjusting the freezer shelf...
To remove the shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
To adjust the shelf:
1. Remove shelf.
2. Remove supports by sliding upwards,
3. Replace supports on desired level.
4. Replace shelf.
Removing the crispers and crisper cover...
PULL OUT TO THE STOP, LIFT THE FRONT
AND PULL AGAIN. To remove the crispers:
1. Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
2. Replace in reverse order.
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support
REMOVE THE To replace the cover:
GLASS INSERT, 1. Replace metal cover support on wall supports
LlFl THE FRAME FR in front section of cabinet.
THEN THE BACK.
2. Fit back of corner into notch supports on walls of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.
Moving the meat drawer and cover . . .
PULL OUT TO THE STOP, LIFI THE To remove the meat drawer:
FRONT AND PULL AGAIN. 1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
ss IS HEAVY. 1. Tilt front of cover up, lift at back, and pull straight
out.
2. Replace in reverse order.
6 |
ACEC
