Using your refrigerator
Refrigerator Control Light Switch Freezer Control
/
Power Saving Control
Setting the controls.. .
Controls for the refriaerator and freezer are in the Glve the refriaerator time to cool down com-
pletely before adding food. (This may take sev-
the first time... eral hours.)
These settings should be about right for normal
b household refrlgerator usage.
The controls will be set about right when milk or
2. Set the FREEZER juice is as cold as You like and when ice cream
CONTROL to B. is firm.
Power Saving Control.. .
The Power Savlng Control on the Control Con-
SOIf3 operates electric heaters around the door 1. Use the CdNSUMES LESS ENERGY? setting when
openings. These heaters help keep moisture from humidity is low.
fcrming on the outside of the refrigerator.
2. Use the ?REDUCES EXTERIOR MOISTURE? setting
only If moisture forms on the outside of the
refrigerator.
Changing the control settings . . .
If you need to adjust temperatures in refrigerator l Adjust the Refrigerator Control first.
or freezer, use the settings listed in the chart below. 0 Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control, if needed.
RECOMMENDED CONTROL
CONDITION : REASONS: SETTINGS:
If Refrigerator Door opened often Refrigerator
Section is Large amount of food added Freezer :
TOO WARM Room temaerature too warm
If Freezer Door opened often Refrigerator 3
Section is Large amount of food added Freezer A
TOO WARM Very cold rcom temperature
QUESTIONS? (can?t cycle often enouahl
,,,ca?l your If Refrigerator Controls not set correctly Refrigerator 2
COOL-LINE? Section is
for your conditions Freezer B
service
TOO COLD
assistance
If ICE isn?t
telephone Heavy ice usage Refrigerator 3
number MADE FAST ENOUGH Very cold room temperature Freezer A
[can?t cycle often encuahl
(page 111,
lf BOTH SECTIONS Door opened often Refrigerator 4
are TOO WARM Large amount of food added Freezer B
Very warm or very cold
room temperatures
5 |
ACEC
