with Stain Cleaner
Control features vary by model.
IMPORTANT: For optimum fabric care, the
STEP 4
appropriate wash and spin speed for the load type
must be selected using the WASH/SPIN Speed knob.
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or coldREGULAR/DELICATES Cycle
water for washing and cold or warm water for rinsing.Regular/Delicates cycles share the same portion of the
Use the chart below as a guide.control dial. For regular fabrics, select the cycle and
turn the Wash/Spin Speed dial to
WASH/RINSELOAD TYPE
NORMAL/NORMAL or SLOW/NORMAL. For
TEMPS
delicate loads, select SLOW/SLOW.
White and heavily soiled, color-fast
HOT/COLDitems.WRINKLE-FREE CLOTHES Cycle
This cycle provides up to 12 minutes of agitation.
Moderately soiled, colored items;
WARM/COLDDepending on the load, select either the
most wrinkle-free items.
NORMAL/SLOW or SLOW/SLOW wash/spin speed.
Brightly colored, lightly soiled
COLD/COLD
items; washable woolens.STAIN CLEANER PLUS Cycle
Stain Cleaner provides approximately 30 minutes of
These settings feature STAIN CLEANER:
agitation and soaking to help remove stubborn dirt and
Hot/Hot/Cold White and heavily soiled items.stains. For more information see page 8.
Warm/WarmModerately soiled, colored items.
STEP 6
Warm
Pull Control Dial Out to Start
Note:In wash water temperatures below 60!F (16!C),
You may stop the washer at any time by simply
detergents do not dissolve well or clean well. Care labels
!pushing the control dial in. Therefore it is possible todefine cold water as up to 85 F (29! C).
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in off positionSTEP 5
Select Cycle
Note: Do not attempt to turn the control dial
To select a cycle, push the control dial in and turn it to
counterclockwise. Damage to the timer will result.
the rightclockwise
of minutes desired for the wash load.
6 |
ACEC
