Load is wrinkledGarment damage
nDid you unload the washer promptly?nCheck the following:
Unload the washer as soon as it stops.Were sharp items removed from pockets before
nDid you use the right cycle for the load being washing? Empty pockets, zip zippers, snap or hook
washed?fasteners before washing.
Use the Permanent Press cycle or another cycle wiWeth re strings and sashes tied to prevent tangling?
low spin speeds (if available) to reduce wrinkling.
Were items damaged before washing? Mend rips and
nDid you overload the machine?broken threads in seams before washing.
The wash load must be balanced and not overloaded.
Loads should move freely during washing.nDid you overload the machine?
The wash load must be balanced and not overloaded.
nWas the wash water warm enough to relax wrinkleLoas, ds should move freely during washing.
or are you using warm rinses?nDid you properly add chlorine bleach?
If safe for the load, use warm or hot wash water. Use Do not pour chlorine bleach directly on load. Wipe up
cold rinse water.bleach spills. Undiluted bleach will damage fabrics.
nAre the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are nDid you follow the manufacturer?s care label
connected to the right faucets. See the Installation instructions?
Instructions.
Load is tangled or twisted
nDid you overload the machine?
The wash load must be balanced and not overloaded.
Loads should move freely during washing.
nDid you wrap items around the agitator?
Drop items loosely into the washer. Do not wrap items
around the agitator.
Gray whites, dingy colors
nDid you properly sort the load?
Dye transfer can occur when mixing whites and colors in
a load. Sort dark clothes from whites and lights.
nWas the wash temperature too low?
Use hot or warm washes if safe for the load. Hot water
should be at least 111°F (44°C) to clean heavy or greasy
soils.
nDid you use enough detergent, or do you have hard
water?
Use more detergent for washing heavy soils in cold or
hard water.
nAre the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are
connected to the right faucets. See the Installation
Instructions.
13 |