To Replace:
1. Grasp the door on the sides with your fingers on the front of
Oven Door
the door and your thumbs on the inside surface.
For normal range use, it is not suggested to remove the oven 2. Hold oven door so that the top edge of each hinge hanger is
door. However, if necessary, follow these instructions. The oven
door is heavy.horizontal. Insert hinge hangers into the front frame hinge
slots.
Before Removing:3. Tilt top of door toward range. Slide hinge hangers down onto
1. Use a putty knife or screwdriver and insert it at the bottom front frame support pins. Make sure the hinge hangers are
corner of the door stop clip.fully seated and engaged on the support pins.
4. Insert the door stop clip with the angular surface at the top of
2. Pry door stop clip free and remove from front frame hinge the frame hinge slot, then push in the bottom of the clip until
slot. Take care not to scratch finish.flanges are flush with the front frame.
3. Repeat procedure for other door stop clip.
To Remove:
1. Open the oven door. Insert door removal pins, included with
your range, into both hinge hangers. Do not remove the pins
while the door is removed from the range.
5. Open the door completely and remove the door removal pins.
Save door removal pins for future use.
6. Close the door.
Storage Drawer
The storage drawer can be removed. Before removing, make sure
2. Carefully close the door until it rests against the door removal
pins.drawer is cool and empty.
3. Grasp the door on the sides with your fingers on the front of To Remove:
the door and your thumbs on the inside surface.
1. Pull drawer straight out to the first stop.
4. Pull door straight up, then toward you. Hinge hangers will 2. Lift up the back of the drawer and pull out.
slide out of front frame hinge slot. Do not remove door
removal pins until the door is replaced on the range.
To Replace:
1. Fit the ends of the drawer rails into the guides in the cavity.
2. Slide the drawer closed.
13 |
ACEC
