CARING FOR YOUR RANGE
REMOVINGTHEOVENDOOR
For normal use of your range, you do not need toDoor removal Door stop clip
remove the door. However, if you find it necessary
to remove the door, follow the instructions in thispin hole
section.
NOTE: The oven door is heavy.
Before removing the door:
1. Use a putty knife or screwdriver and insert it at
the bottom corner of the door stop clip.
Range
2. Pry door stop clip free and remove from front
frame hinge slot. Take care not to scratch porce-
lain.
3. Repeat procedure for other door stop clip.
Hinge Front frame
hangerhinge slot
To remove:
1. Open the oven door. Insert door removal pins,3. Grasp the door on the sides with your fingers on
included with yourthe front of the door
range, into both hingeand your thumbs on
hangers. Do not removethe inside surface.
the pins while the door
is removed from the
range.
2. Carefully close the door until it rests against the4. Pull door straight up, then toward you. Hinge
door removal pins.hangers will slide out of front frame hinge slot.
To replace:
NOTE: The door removal pins you inserted must
still be in both hinges.
1. Grasp the door on the sides with your fingers
on the front of the door and your thumbs on the
inside surface.
32 |
ACEC
