5. Once the oven is completely cooled, remove ash with a damp
Style 2 - Electric Oven Controlcloth.
The AUTO-CLEAN cycle time is adjustable, from 2 hours To Delay Start Self-Clean Using AUTO-CLEAN
30 minutes to 4 hours 30 minutes in 15-minute increments. 1. Press AUTO-CLEAN.
Suggested clean times are 2 hours 30 minutes for light soil and
4 hours 30 minutes for heavy soil. The last 30 minutes of the 2. Press the TEMP/HOUR ?up? and ?down? arrow pads to set
the desired self-clean cycle time.
cycle is for cool down.3. Press START TIME.
To Self-clean Using AUTO-CLEAN4. Press the TEMP/HOUR ?up? and ?down? arrow pads to set
1. Press AUTO CLEAN.the desired start time.
2. Press the TEMP/HOUR ?up? or ?down? arrow pad to set the 5. Press START.
desired self-clean cycle time. The oven door will automatically lock. ?DOOR LOCKED? and
3. Press START.?CLEAN? indicator lights will be displayed.
The oven door will automatically lock. The ?DOOR LOCKED? 6. When the self-clean cycle is complete and the oven cools,
and ?CLEAN? indicator lights will be displayed. The time the ?DOOR LOCKED? and ?CLEAN? indicator lights will turn
remaining will also be displayed. off.
4. When the self-clean cycle is complete and the oven cools, 7. Once the oven is completely cooled, remove ash with a damp
the ?DOOR LOCKED? and ?CLEAN? indicator lights will turn cloth.
off.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions METALLIC PAINT (on some models)
on cleaning products. Do not wipe down any of the inside
surfaces until the oven has completely cooled down. Applying a Do not use abrasive cleaners, cleaners with bleach, rust
cool damp cloth to the inner door glass before it has cooled removers, ammonia or sodium hydroxide (lye) because paint
completely could result in the glass breaking.surface may stain.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.COOKTOP CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)Do not soak knobs. When replacing knobs, make sure knobs are
in the Off position.
Food spills containing acids, such as vinegar and tomato, should On some models, do not remove seals under knobs.
be cleaned as soon as the entire appliance is cool. These spills Cleaning Method:
may affect the finish.
Cleaning Method:Soap and water or dishwasher:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing Pull knobs straight away from control panel to remove.
pad:
Gently clean around the model and serial number plate CONTROL PANEL
because scrubbing may remove numbers.
Do not use abrasive cleaners, steel-wool pads, gritty washcloths
All-Purpose Appliance Cleaner Part Number 31662 (not or some paper towels. Damage may occur.
included):
See ?Assistance or Service? section to order.Cleaning Method:
Glass cleaner and soft cloth or sponge:
STAINLESS STEEL (on some models)Apply glass cleaner to soft cloth or sponge, not directly on
panel.
To avoid damage to stainless steel surfaces, do not use soap-All-Purpose Appliance Cleaner Part Number 31662 (not
filled scouring pads, abrasive cleaners, Cooktop Polishing included):
Creme, steel-wool pads, gritty washcloths or some paper towels.
See ?Assistance or Service? section to order.
Rub in direction of grain to avoid damaging.
Cleaning Method:PORCELAIN-COATED GRATES AND CAPS
Stainless Steel Cleaner & Polish Part Number 31462 (not
included): Food spills containing acids, such as vinegar and tomato, should
See ?Assistance or Service? section to order.be cleaned as soon as the cooktop, grates and caps are cool.
Liquid detergent or all-purpose cleaner:These spills may affect the finish.
To avoid chipping, do not bang grates and caps against each
Rinse with clean water and dry with soft, lint-free cloth.other or hard surfaces such as cast iron cookware.
Vinegar for hard water spots.Do not reassemble caps on burners while wet.
Do not clean in the Self-Cleaning cycle.
16 |
ACEC
