2. Slowly close the door until it rests against the door removal
STORAGE DRAWER (on some models)pins.
3. Grasp the door on the sides with your fingers on the front of
Make sure drawer is cool and empty before cleaning.the door and your thumbs on the inside surface.
For more information, see ?Storage Drawer? section.
4. Pull door straight up, then toward you. Hinge hangers will
Mild detergentslide out of front frame hinge slot. Do not remove door
Drawer Liner (on some models)removal pins until the door is replaced on the range.
Remove all stored items from drawer and lift out drawer liner.
Clean with mild detergent.
WARMING DRAWER and TRAY (on some models)
Make sure drawer is cool and remove tray.
Mild detergent (for both)
To Replace:
Oven Light
1. Grasp the door on the sides with your fingers on the front of
(on some models)the door and your thumbs on the inside surface.
The oven light is a standard 40-watt appliance bulb. It will come 2. Hold oven door so that the top edge of each hinge hanger is
on when the oven door is open. It will not work during the Self-horizontal. Insert hinge hangers into the front frame hinge
Cleaning cycle (on some models). On some models, when the
slots.
oven door is closed, press OVEN LIGHT to turn it on or off.
3. Tilt top of door toward range. Slide hinge hangers down onto
Before replacing, make sure the oven and cooktop are cool and front frame support pins. Make sure the hinge hangers are
the control knobs are off.fully seated and engaged on the support pins.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
4. Insert the door stop clip with the angular surface at the top of
the frame hinge slot, then push in the bottom of the clip until
flanges are flush with the front frame.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb and bulb cover by turning clockwise.
5. Plug in range or reconnect power.
Oven Door
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure oven is off and
cool. Then, follow these instructions. The oven door is heavy.
5. Open the door completely and remove the door removal pins.
Before Removing:Save door removal pins for future use.
1. Use a putty knife or screwdriver and insert it at the bottom
corner of the door stop clip.6. Close the door.
Storage Drawer
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
To Remove:
1. Pull drawer straight out to the first stop.
2. Pry door stop clip free and remove from front frame hinge 2. Lift up the back of the drawer and pull out.
slot. Take care not to scratch finish.
To Replace:
3. Repeat procedure for other door stop clip.
1. Fit the ends of the drawer rails into the guides in the cavity.
To Remove:2. Slide the drawer closed.
1. Open the oven door. Insert door removal pins, included with
your range, into both hinge hangers. Do not remove the pins
while the door is removed from the range.Warming Drawer
(on some models)
Remove all items from inside the warming drawer, and allow the
unit to cool completely before attempting to remove the drawer.
17 |
ACEC
