The control panel and programmes
All Ţgures are nominal and vary for example due to temperature variations on the inlet water.
The Ţgures apply to washing up 5 IEC-settings.
14235
1 On/Off-buttonDoor lock
Press the button in order to start the required Press the handle down and open the door. Avoid opening
programme.the door while the machine is running. If the door is opened
and is put standing ajar after a completed programme the
2 Temperature selectordishes will dry faster.
Press the button in for 55!C.
3 Temperature selectorProgrammes
Press the button in for 65!C.Prerinseis used if you want to wait until you have a full
load. This cycle rinses the load and keeps it moist, making
4 Programme selector
the main wash easier later on. No detergent should be used.
Turn the programme selector clockwise to the It does not matter which temperature you select.
programme required and press in the On/Off button.
During the water heating process, the timer is stan-Intensivefor loads which have heavily dried-on food
ding still. To isolate the dishwasher from the mains remnants and for those which are heavily soiled.
completely, unplug it from the wall socket.
Normalfor normal soiled loads, which do not need any
5 Indicator lamprinse off.
While the programme is in progress, the operating Rinsefor warm or hot rinsing for dishes (65!C) or
lamp is lit and it goes out when the programme is ready.glasses (55!C).
Plate warmingis used for warming dinner plates etc.
prior to serving a meal.
- 5 - |
ACEC
