To deactivate the rinse aid indicator
light proceed as follows:
(the dishwasher must be switched off)
1.Press function push buttons 1 and 2 simultaneously.
2.While keeping the function push buttons 1 and2 pressed
switch on the dishwasher by pressing the On/Offpush
button.
The On/Offindicator light comes on.
At the same time, the indicator lights of push buttons
1 and 2 start flashing.
SO557
3.Press function push button 2, the corresponding indicator
light keeps flashing while the indicator light of push button
1 turns off. At the same time the rinse aidindicator light
starts to flash.
SO559
4.Press push button 2 again, the rinse aidindicator light turns
off, this means that the rinse aid indicator light has been
deactivated.
5.To memorise the operation, switch off the dishwasher by
pressing the On/Offpush button.
To reactivate the rinse aid indicator light follow the same
process until the rinse aidindicator light starts to flash.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (position
1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
The dose is factory set in position 4.
Reduce it if there are sticky whitish streaks on the dishes.
BR09
24 |
ACEC
