When the programme has finished, the END pilot
5 START PAUSE button
light comes on and the IN PROGRESS light goes
After having selected the required programme, pressout.
ENGLISH
this button to start the machine; the corresponding
pilot light stops flashing and remains lit.
-
To interrupt a programme which is running, depress
-
the START/PAUSE button: the corresponding pilot
light starts to flash. -
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
6 DELAY START buttonThe END light flashes in the event of operating
problems:
This button makes it possible to delay the starting of
? 4 flashes: door open
the washing programme by 12, 9, 6 and 3 hours. The
delay you have selected is indicated by the coming? 2 flashes: problem with water draining
on of the corresponding light.? 1 flash: problem with water supply
You must select this option after you have set
For more information see paragraph ?Something not
the programme and before you press the
working??
START/PAUSE button.
You can cancel the delay time at any moment,
8 Programme selector dial
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE
button, and you wish to cancel the delay time,
proceed as follows:
? set the washing machine to PAUSE by pressing the
START/PAUSE button;!
? press the DELAY START button once, the light
relevant to the selected delay goes off .
? press the START/PAUSE button again to start the
programme.
The selector dial can be turned either clockwise or
Important!
anticlockwise.
IThe selected delay can be changed only after
Position O corresponds to Reset programme/Switching
selecting the washing programme again.
OFF of the machine.
IThe door will be locked throughout the delay time.
At the end of the programme the selector dial
If you need to open the door, you must first set
must be turned to position O, to switch the
the washing machine to PAUSE by pressing the
machine off.
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.ATTENTION!
The delay start cannot be selected withIf you turn the programme selector dial to another
programmes ?Q? (DRAIN) and ?R? (SPIN).programme when the machine is working, the lights
of the programme progress display start to flash for 2
seconds. The machine will not perform the new
7 Programme progress display
selected programme.
When you choose the delayed start, the light
relevant to the selected delay lights up.
After the machine has started, the remaining time is
shown by the corresponding indicator light.
From the beginning and during the whole washing
programme, only the IN PROGRESS light stays on.
12 |
ACEC
