SymptomPossible causes
n
The door will not openThe programme is still running.
nThe door lock has not yet released (door pilot light on).
nThere is water in the tub
Spinning starts late or the machinenThe electronic unbalance detection device has cut in because the
does not spinlaundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 10 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and reselect the spin programme.
The machine makes an unusualnThe machine is fitted with a type of motor which makes an unusual
noisenoise compared with other traditional motors. This new motor ensures a
softer start and more even distribution of the laundry in the drum when
spinning, as well as increased stability of the machine.
No water is visible in the drumn Machines based on modern technology operate very economically
using very little water without affecting performance.
If after the above checks, there is still a fault, call your
Customer Care
local Zanussi Service Force Centre.
For general enquiries concerning your Zanussi appliance
or for further information on Zanussi products, please
Service & Spare Partscontact our Customer Care Department by letter or
If you require an engineer or wish to purtelephone as follochase sparews:
parts contact your local Zanussi Service Force Centre
by telephoning:
Customer Care Department
0870 5 929929Zanussi
55-77 Street High
Your telephone call will be routed to the Service Centre
covering your post code area.Slough
Further information can be found in the accompanBerkshireying
customer care booklet and also in your telephone
SL1 1DZ
directory under OZ�.
Tel 08705 727727
When you call the Service Force Centre please make
sure you give the model and serial number of the
appliance.
This information can be found on the rating plate (see
picture) or on the guarantee card.
In-guarantee customers should ensure that the
above checks have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown. Please note that proof of
Mod...........Ser.
purchase is required for any in-guarantee service
calls.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
19 |
ACEC
