SERVICING
Before contacting your local Service Force Centre, check your machine against the simple
maintenance guidelines given below.
ProblemPossible solution
The appliance does not start upYCheck if the door is closed properly.
YCheck if the appliance is plugged in.
YCheck the fuse.
Check if the program dial is in the correctY
position.
The machine does not fillYCheck if the water tap is on.
Check if the tap is clogged.Y
YCheck if the inlet hose is bent.
YCheck if the water inlet filter is clogged.
The machine empties as it fillsThe end of the drain hose is too low (see
Y
page. 24)
The machine does not drain or spinYCheck if the drain hose is bent or squashed.
Check if the drain filter is clogged.
Y
YCheck if the selected program includes
spinning.
The machine leaks or overflowsToo much washing powder.Y
YUnsuitable washing powder.
YCheck the joints for leaks. It is rather difficult
to see the water running along a hose.
The machine vibrates or is noisyYCheck if all transport devices have been
removed.
YCheck if the appliance touches the walls or
furniture.
YCheck if the legs are adequately levelled
and the nuts tight.
Rating plate
iRATING PLATEMod. ..........Prod. No. ...........Ser. No. .........
If, after above checks, there is still a fault, call
your Local Service Centre.
Please, make sure you give the purchasing date
and the Model, Product number (Prod.No�) and
Serial number (Ser. No�) of the appliance.
Mod. ..........
(These data will be found in the adhesive cardProd. No. ...........
Ser. No. .........P0042
behind the door of clothes charging).
35 |
ACEC
