ZOOM GFX-3 Instruction Manual

En-GFX3.book 16 Z
8
?
?
?
??
?
?e
?xýe
Uxý9=
?p
?
? 
Other Functions
3.Push the expression pedal fully
Adjusting the expression down and release it.
pedal
The expression pedal is adjusted for optimum
operation at the factory, but sometimes,
Push strongly, so that
readjustment may be necessary. If pushing the pedal touches here.
pedal fully down does not have a strong effect,
or if the volume or sound changes excessively
even when the pedal is only lightly pushed,
calibrate the pedal as follows. When foot is lifted,
pedal returns slightly.
1.Hold down the [PEDAL] key while
turning power to the GFX-3 on. 4.Press the [STORE] key.
The indication "dn" appears on the display.
The adjustment is complete, and group/bank
display for the patch appears again.
HINT
Y The position of the pedal in step 3
2.Fully raise the expression pedal
determines the module on/off switching
and press the [STORE] key. point. If you want the pedal to perform on/
The indication "UP" appears on the display. off switching with a lighter touch, set the
pedal in step 3 to a somewhat higher
position.
YIf the indication "Er" is shown, repeat the
procedure from step 2.
Pedal fully raised
ZOOM GFX-316