To Replace:
Oven Light(s)1. Insert both hanger arms into the door.
The oven light is a standard 15-watt appliance bulb. It will come
on when the oven door is opened. The light will not work during
the Self-Cleaning cycle (on some models). On some models,
when the oven door is closed, press OVEN LIGHT to turn the light
on or off.
To Replace:
Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
2. Open the oven door.
You should hear a ?click? as the door is set into place.
3. Turn bulb counterclockwise to remove from socket.3. Move the hinge levers back to the locked position. Ensure
4. Replace bulb and bulb cover by turning clockwise.that the door is free to open and close. If it is not, repeat the
5. Plug in range or reconnect power.removal and installation procedures.
Oven DoorStorage Drawer
The storage drawer can be removed. Before removing, make sure
For normal range use, it is not suggested to remove the oven drawer is cool and empty.
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.To remove:
1. Pull drawer straight out to the first stop.
To Remove:2. Lift up the back of the drawer and pull out.
1. Open oven door all the way.
To replace:
2. Flip up the hinge latch on each side.1. Fit the ends of the drawer rails into the guides in the cavity.
2. Slide the drawer closed.
Sweep-Through Base
When the storage drawer is removed, the sweep-through base
makes cleaning easier and provides access to the leveling legs.
3. Close the oven door as far as it will shut.
4. Lift the oven door while holding both sides.A
Continue to push the oven door closed and pull it away from
the oven door frame.
A. Sweep-through base
17 |
ACEC
WHIRLPOOL
