TROUBLESHOOTING
No PowerTV Only Produces MONO Sound
Y Check the TV power cord. Unplug the TV, wait 10 seconds,Y If using a cable box with RF only type connections, the signal
then reinsert the plug into the outlet and push the POWERcoming from the cable box will be produced in MONO only.
button again.Y Check Sound control setting. Change setting to Stereo.
Y Check that the outlet is not on a wall switch. Remote Does Not Work
Y Be sure the fuse is not blown on the AC power strip, if one isY Check the batteries. If necessary, replace them with AA
being used.Heavy Duty (Zinc Chloride) or Alkaline batteries.
No PictureY Clean the remote control and the remote control sensor win-
Y Check antenna connections. Are they properly secured to thedow on the TV.
TV's ANT 75& plug?Y Check the TV power cord. Unplug the TV, wait 10 seconds,
Y Check the TUNER MODE control for the correct tuner set-then reinsert the plug into the outlet and push the POWER
ting.button again.
YTry running the Auto Program feature to find all availableY Be sure the fuse is not blown on the AC power strip, if one is
channels.being used.
Y Press the AV button on the remote to make sure the correctY Check to be sure the TV outlet is not on a wall switch.
signal source is selected (FRONT or Current Channel).TV Displays Wrong Channel or No Channels Above 13
No SoundY Repeat channel selection.
Y Check the VOLUME buttons.Y Add the desired channel numbers (using the CHANNEL
Y Check the MUTE button on the remote control.EDIT control) into the TVOs memory.
Y If youOre attempting to hook up auxiliary equipment, checkY Check to be sure the TUNER MODES are set to the CABLE
the audio jack connections located on the front of the TV.option and run the Auto Program feature to find all available
channels.
34 |
ACEC
PHILIPS
