Maintenance, cont.
Removal of GasOven LightConventional
Appliance(select models)Surface Burners
(select models)
Gas appliance connectors used to connect CAUTIONS:
this appliance to the gas supply are notUnder no circumstances are the surface
YDisconnect power to range before
designed for continuous movement. Onceburner assemblies to be taken apart for
replacing light bulb.
installed, DO NOT repeatedly move thiscleaning. The surface burner assembly can
gas appliance for cleaning or to relocate. Ifbe removed to clean the burner box area.YUse a dry potholder to prevent pos-
this appliance has to be moved and/orsible harm to hands when replacingFreestanding range only:
removed for servicing, follow the proce-bulb.The two surface burner assemblies are
dure described in the installation instruc-secured in place during transportation with
YBe sure bulb is cool before touching.
tions.screws. Once the range is installed, these
YDo not touch hot bulb with a dampscrews may be removed to allow quick
To prevent range from accidentally tip-
cloth as this may cause the bulb toand easy removal of the burner assem-
ping, range must be secured to the floor by
break.blies.
sliding rear leveling leg into the anti-tip
bracket.To remove: Allow the burner assembly to
cool. Lift up cooktop. Grasp the burner
To replace light bulb:
assembly and rotate it slightly toward the
1. Remove light bulb.left to release the two tabs on the assembly.
Oven Window
Then lift the assembly and pull toward the
2 Replace with a 40 watt appliance bulb.
(select models)back of the cooktop until the air shutter
3. Reconnect power to range. Reset clock.ends on the assembly release from the
To protect the oven doorvalves.
window:
To replace: Insert the air shutter ends on
Lower Panelthe burner assembly over the valves and
1. Do not use abrasive cleaning agents
lower the assembly into place. Be sure to
such as steel wool scouring pads or(select models)
secure the two tabs on the burner assem-
powdered cleansers as they may scratch
Ranges that do not feature a lower broilingbly into the two slots on the burner sup-the glass.
compartment will have a panel in place ofport bracket which is mounted to the
2. Do not hit the glass with pots, pans,the broiler door.burner bottom. (NOTE: If the tabs are not
furniture, toys, or other objects.properly inserted into the slots, the assem-
To remove panel:
bly may rock and the burners may not
3. Do not close the oven door until the
Grasp the bottom corners of the panel.
light properly.)
oven racks are in place.Then lift the panel up and away from the
range.
Scratching, hitting, jarring or stressing the
glass may weaken its structure causing anTo replace panel:
increased risk of breakage at a later date.Align the four slots on the panel with the
four screws on the range front frame. Then
lower the panel and push down until the
panel snaps into place.
11 |
ACEC
WHIRLPOOL
