Camera & camcorder
&Connect your camera or camcorder to sockets at the front side of your TV.
éConnect the equipment to VIDEO2and AUDIO L1for mono
equipment.
Press the X key repeatedly to select the sound coming from one or AUDIORLVIDEOS-VIDEO
both loudspeakers of your TV.
For stereo equipment also connect AUDIO R1.
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS1 2 3
cables with the S-VIDEO input 3 and AUDIO inputs 1.
Digital equipment (DVD, digital satellite tuner,...)
Connect your digital equipment with a eurocable 1 to one of the
EXTERNAL 1/2/3euroconnectors (EXT1,EXT2 or EXT3), or with a cinch cable to the VIDEO
input at the front side of the TV (see illustration above).
Note:the low quality of some digital picture material may be the cause of digital
1
image distortion.In this case select Ecounder the SMARTPICTURE a key on the
remote control as this setting is intended to improve distorted picture quality.
DVD
Headphone
&Insert the plug into the headphone socket Lat the front side of the TV.
éPress ?on the remote control to switch off the internal loudspeakers
of the TV.
LThe headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the SOUND menu select Headphone volume to adjust the headphone
volume, see p. 12.
Audio equipment / Amplifier
AUDIOConnect the audio cables to the audio input of your audio equipment and to
AUDIO Land Rat the back of your TV.
You can listen to your TV sound via your audio equipment.
If you want to connect more equipment to your TV, consult your dealer.
Connect Peripheral Equipment23 |
ACEC
PHILIPS
