Exit Setup4DPS
Load BIOS Defaults
This features stays in the default system values before the user has changed any CMOS values. If CMOS
setting lost. the BIOS defaults will automatically be loaded.
Load Setup Defaults
This features uses to load the default setting for normal use.
Password Setting
When you select this function, the following message will appear on the screen to assist you in creating a
password.
ENTER PASSWORD:
Type the password, up to eight characters, and press <Enter>. The password typed now will clear any
previously entered password from CMOS memory. You will be asked to confirm the password. Type the
password again and press <Enter>. You may also press <Esc> to abort the selection and not to enter a
password.
To disable password, just press <Enter> when you are prompted to enter password. A message will
confirm the password being disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
PASSWORD DISABLED.
If you select System at Security Option of BIOS Features Setup Menu, you will be prompted for the
password every time the system is rebooted or any time you try to enter Setup. If you select Setup at
Security Option of BIOS Features Setup Menu, you will be prompted only when you try to enter Setup.
IDE HDD Auto Detection
You can use this utility to detect the IDE hard disk parameters and enter it automatically. It can
automatically detect up to four hard disk which connected to the system.
Save And Exit Setup
Select this option when you finished setup the CMOS and it will reboot the system after you press ?YES?.
Exit Without Saving
If you decided not to save any change you had made. You can select this option to exit the CMOS setup
and all the change you made will lose. When you select this option and press ?yes?, the system will reboot
and the CMOS data will not change.
Page 24 |
ACEC
OTHERS
