BIOS Features Setup 5DVX
Typematic Rate (Chars/Sec)
Typematic rate sets the rate at which characters on the screen repeat when a key is
pressed and held down. You can select 6-30 characters per second. The default setting
is 6.
Typematic Delay (Msec)
When holding down a key, the time between the first and second character display.
you specified numbers of times of character repeat on the screen. The default setting
is 250.
Security Option
This category allows you to limit access to the system and Setup or just to Setup.
When you select system, the system will not boot and access to Setup will be denied if
the correct password is not entered at the prompt. If you select Setup, the system will
boot but access to Setup will be denied if the correct password is not entered at the
prompt. The default setting is Setup.
PCI/VGA Palette Snoop
This option controls the system to access the PCI VGA card palette register. In
general, this option is disabled. However, you may need to enable this option for some
VGA cards which have incorrect color displayed on some software application.
OS Select For DRAM > 64MB
Some the OS/2 application access the memory in different mode. Enable this option to
allow the system use another mode to access the main memory for OS/2 applications.
VIDEO BIOS Shadow
The system BIOS is automatically shadowed .
The default setting for the ?Video BIOS Shadow? is ?Enabled?. It determines whether
video BIOS will be copied to RAM. However, it is optional from chipset design.
Video Shadow will increase the video speed.
C8000 - CFFFF Shadow/E8000 - EFFFF Shadow
These categories determine whether optional ROM will be copied to RAM by 16K
byte. You can enable the optional shadow or you can disable it. The default setting is
disabled.
Page 14 |
ACEC
OTHERS
