Control features vary by model.
!COTTONS CycleNote: In wash water temperatures below 60F
(16! C), detergents do not dissolve well or cleanFor regular fabrics, select the cycle time and turn the
well. Care labels define cold water as up to 85! FWash/Spin Speed dial to Normal/Normal.
For fabrics needing a slower spin speed to reduce(29! C).
wrinkling, set the control dial on Wrinkle-Free and
turn the wash/spin speed dial to Normal/Slow.STEP 4
DELICATES Cycle
This cycle provides up to 12 minutes of agitation.Select Options (if desired)
EXTRA RINSE Depending on the load, select either the Slow/Slow
or Slow/Normal wash/spin speed.When the knob is in the on position, an additional
SOAK Cyclerinse at the end of the COTTONS cycle is provided to
more completely remove laundry additives, suds,
This cycle provides approximately 30 minutes ofperfumes, etc.
agitation and soaking to help remove stubborn dirt
END OF CYCLE SIGNAL select modelsand stains. For more information see page 10.
The end of cycle signal will sound once the cycle is
completed. The end of cycle signal can be canceled bySTEP 6
setting the switch to Off.
Pull Control Dial Out to Start
You may stop the washer at any time by simply
STEP 5
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
Select Cyclerepeat any part of a cycle. The control dial must be
To select a cycle, push the control dial in off positionpushed in off position
and turn it to the right clockwise
the number of minutes desired for the wash load.
Note: Do not attempt to turn the control dial
IMPORTANT: For optimum fabric care, thecounterclockwise. Damage to the timer will result.
appropriate wash and spin speed for the load type
must be selected using the WASH/SPIN SPEED knob.
8 |
ACEC
WHIRLPOOL
