SELECTING THE FILM TYPE AND PERFORM SHADING
Negative Film On Glass
Select the film size, then touch the [Shading]
1
key.
Insert the ON� (Negative) filter in the left slot as
2
shown in the illustration.
p Be careful to insert the filter as shown, not the other
way around.
Cut the positioning sheet to match the film size.
3
p Regarding the positioning sheet, * See page 148.
Place the positioning sheet under the mirror unit
4(on the exposure glass).
p Place the marked corner of the film position sheet at
the rear left corner of the exposure glass.
p Before going to the next step, make sure that the
fresnel lens is lowered in position.
Set the base film in the film strip holder.
5
p Regarding setting the base film, * See page 146.
Open the film cover and while pressing the holder
6lever to the left, rest the film strip holder in the
right slot.
154 |
ACEC
RICOH
