Menu item setting
R/L cut: About one-third of both the right and left
$ Setting and changing of the setting (Halogenportions of the screen are excluded from
Mode, Fluorescent Mode, Outdoor Mode)measurement.
1Brightness Set Display
1 Video Level Adjustment [Picture Level: �50 to +50]
Convergence level of AUTO IRIS/AUTO GAIN UP/ AUTO
ND (ELC) can be adjusted.4 Auto ND (ELC) Setting [Auto ND (ELC): OFF, ON]
2 Detecting Ratio Adjustment OFF: Luminance is not automatically adjusted by the
[Light PEAK/AVG: P50 to A50]electronic shutter.
The ratio of AUTO IRIS/AUTO GAIN UP/AUTO ND (ELC)ON: The electronic shutter is controlled to automatically
detected peak to average can be adjusted within aadjust the luminance.
predetermined range.Notes
Y ON is automatically selected when the electronic shutter
3 Photometric Measurement Method Setting (H) on the submenu [Other Set] is set to [Auto ND].
[Light Area: All, Center, Top cut, BTM cut, R/L cut]OFF is selected when other than [Auto ND] is selected.
A photometric measurement method can be selected forY ON is selected when the SHUTTER switch is set to
AUTO IRIS/AUTO GAIN UP/AUTO ND (ELC).[ELC] in RCU (RCB) mode, and OFF is selected when it
is set to other than [ELC].
All:All the screen area is measured.
Center: The screen is measured mainly in the center
area, about one-third of both the top and
bottom and one-third of both the right and left
portions of the screen are excluded from
measurement.
Top cut: About one-third of the top part of the screen is
excluded from measurement.SHUTTER switch
BTM cut: About one-third of the bottom portion of theRCU (RCB)
-34-screen is excluded from measurement. |
ACEC
PANASONIC
