PROTECTING THE ENVIRONMENT
? Packing- Lightly soiled laundry should be washed at a
The packaging is marked with the recycling low temperature or with a short programme.
symbol , signifying that it can be 100%
recycled.- When washing small loads press the ?Lightly
Soiled?/?Half load? button (if present) and
? Applianceuse less detergent.
The appliance is made of recyclable
materials. Dispose of the appliance in - If you wish to dry the laundry in a household
conformity with environmental regulations. dryer, use the highest spin speed (depending
Make it inoperable: pull out the plug and cut on the programme).
off the power cable so that the appliance The dryer will then consume less energy.
cannot be connected to the mains.
- Do not exceed the recommended dosages
? Eco-tipson the detergent packet.
- A full load (depending on the programme
selected) gives the best energy and water - Only use bleach or stain remover if
consumption.absolutely necessary.
- Laundry which is lightly to moderately soiled
does not require a prewash.
SAFETY INSTRUCTIONS
? The appliance must only be used in the ? Never use excessive force to open the door.
household for the prescribed uses.
? Children must not be allowed to play with or
? All connections to the water and electrical inside the machine. Do not rest any weight on
mains must be made in accordance with the the door.
manufacturer's instructions and following
local utility company safety regulations (see ? Packaging materials can be dangerous for
?Installation Instructions?).children. Keep the packaging material
(plastic bags, polystyrene, etc.) well out of
? Before any cleaning and maintenance switch their reach.
off the machine or disconnect it from the
mains.? The appliance conforms to European safety
regulations, EC directive 93/68/EWG and EN
? Switch off the washing machine and turn off 60555.
the tap(s) whenever the machine is not in
use.
MOVING AND TRANSPORTING THE APPLIANCE
1. Pull out the mains plug.
2. Shut off the water tap(s).
3. Disconnect the inlet and drain hoses.
4. Drain residual water from the appliance and
hoses (see ?Draining Residual Water?).
5. Fit the transit bolts (see ?Installation
Instructions?).
6 |
ACEC
WHIRLPOOL
